Features
No moving parts, optimal durability，Ultra fast switching speed，Extremely stable locking mode
Applications
system monitor，High speed protection，optical fiber sensing system
1x2 2x2 MO-Switch
Zg photonics 1x2or 2x1 optical switch is an all solid-state device without any moving parts. The switching of the optical light is realized by utilizing Faraday Effect.This is achieved using a patent protected non-mechanical configuration with solid-state all-crystal design which eliminates the need for mechanical movement. The microsecond fiber optic switch is designed to meet the most
Features
No moving parts, optimal durability
Ultra fast switching speed
Extremely stable locking mode
low-power consumption
Easy to route, all fibers are on the same side
Excellent reliability and stability
Performance Parameter
参数 Parameter 单位 Unit 参数值 Value 备注 Notes 波长范围 Wavelength Range nm 1525~1565 其他波段可选 Other band optional 插入损耗 Insertion Loss dB 0.7(Typ.); 1.2 (Max.) PDL 偏振相关损耗 dB 0.1 (Typ.); 0.2 (Max.) 回波损耗 Return Loss dB 40 串扰 Cross-talk dB 40 典型值 >50dB Typical >50dB 偏振模色散 PMD ps 0.2 重复性 Repeatability dB +/- 0.01 使用寿命 Durability cycles >100Billions 开关时间 Switch Time μs 10~30/200~400 其他速度可选 Other speed optional 储存温度 Storage Temperature P0PC -40~85 工作温度 Operating Temperature P0PC -5~70 最大光功率 Maximum Optical Power mW 500 大功率可选 High power optional 尺寸（长×宽×高）Dimension( L×W×H ) mm 28 × 9.5 × 7.8
Note:
All the specifications are based on the devices without connectors, and guarantee it within the wavelength, polarization and temperature range.
Dimension(mm)
Electrical Specifications
参数Parameters 规格 Specifications 单位 Unit 常规 Regular 超快 Ultra-fast 开关电压 (VCC) Switching Voltage (VCC) 5 (±5%) 6.0~7.0 V 开关电流 Switching Current < 100 < 350 mA 驾驶模式 Driving Mode 电压或脉冲驱动 Voltage or Pulse Driving 脉冲驱动 Pulse Driving NA 脉冲宽度（典型） Pulse Width (typical) 1000 20 μs 切换频率 Claim Frequency <800 < 3000 Hz
Pin control signal corresponding to switching status table
引脚1 Pin1 引脚2 Pin2 光输出端口 The Optical Output Port 1（电压 = VCC） 0（电压=GND） 0（电压=GND） 1（电压 = VCC） 1（电压 = VCC） 0（电压=GND） 0（电压=GND） 1（电压 = VCC）
IN OUT1
IN OUT2
OUT2 IN
OUT1 IN
ordering information
ZGS-111210
工作模式 Working mode | 开关速度 Switching speed | 工作波长 Operating wavelength | 光纤 Fiber type | 光纤长度 Fiber length | 连接器类型 Connector type |
1.常规 1.Regular 2.双向 2. Bidirectional
| 1.200~400us 2.10~30us 3. Others | 1.C Band 1525~1565 nm 2. L Band 1565-1615 nm 3. C & L Band 4. Others | 1.250μm光纤 2. 900μm光纤 3. Others | 1.0.5 +/- 0.1 m 2. 1.0 +/- 0.1 m 3. Others | 0.无接头/No 1. FC/UPC 2. FC/APC 3. SC/UPC 4. SC/APC 5. Others |
QQ在线咨询
0816 - 2384466
