Definition
This is a modularly designed laser based on an all-fiber architecture. It can provide a total power of ≥1000W, a minimum pulse width of approximately 500fs, and a repetition rate of 1GHz, making it suitable for 24/7 industrial production needs and cutting-edge scientific research.
Feature
High average power: ≥ 1000W
Ultra-short pulse width: ~ 500fs
High repetition frequency: 1GHz
Good beam mode
High pulse energy stability
Application
Composite material processing
High-yield industrial processing
3D printing
Specification
Parameter | Unit | Value |
Central wavelength | nm | ~1064 |
Total power | W | ≥1000W/500W |
Repetition frequency | GHz | 1+0.1GHz/0.5+0.1GHz |
Power stability |
| <1% |
Pulse width | fs | ~500fs |
Beam quality |
| M2<1.3 |
Spot diameter | mm | ~5mm(1m from the output port) |
Spot divergence angle (full angle) |
| <2mrad (IS0-11146-1definition) |
Synchronous output |
| SMATTL signal |
Control mode |
| RS232 or DB25 |
Power supply | V | AC 100V-240V 50/60Hz Rated power is not less than 4000W |
Ordering info
ZG | CWL | Total power | Repetition frequency | Pulse width |
1064nm | ≥1000W | 1+0.1GHz | ~500fs |
joe@zg-photonics.com
0816 - 2384466
